Table of Contents
Advertisement
P-TEST button
1
2
APP button
Left IR sensor function
3
change button
4
Stabilization indicator
5
Left IR sensor
6
Weighing display
7
ON:OFF key
8
HOME key
9
PRINT button
10
CAL button
Communication device
11
setting button
Right IR sensor function
12
change button
13
Capacity, readability
14
Right IR sensor
15
Date/time display
16
Warning display
17
Unit display
The P-TEST button performs a quick performance test.
The quick performance test automatically checks the performance of the
balance by loading and unloading the internal weight. Refer to
Performance
Check".
The APP button displays the application setting screen and saves the
settings related to weighing.
Main items: Application selection (Normal weighing, Counting mode,
Percent mode, Minimum weight alert function, Unit of measure, Minimum
display digit, Statistical calculation function, Decimal separator, Warning
display, etc.) Refer to
Displays the options for changing the IR sensor operation settings.
You can configure the settings individually for the left and right IR
sensors. At the factory setting, they open/close the breeze break door.
Displayed when the weighing value of the balance is stable.
A touchless sensor. When you bring your hand closer, it reacts and the
assigned breeze break door opens/closes (at the factory setting). Refer
to
"4. IR Sensors and Auto
Displays the weighing value of the balance.
Turns the screen display on and off. The ON:OFF key is active during
any operation.
When the screen display is turned off, the standby screen appears.
When the screen display is turned on, the weighing screen appears.
Displays the weighing screen. The HOME key is active during any
operation.
Outputs data to the device connected to the balance.
Refer to
"16. Connection with Peripheral
The CAL button displays the [Sensitivity adjustment/calibration test]
screen. Select and execute the sensitivity adjustment/calibration test with
the internal or external weight. Refer to
Screen".
Displays the
[7. Communication
Configure the settings of or remove the connected communication
device.
Displays the options for changing the IR sensor operation settings.
You can configure the settings individually for the left and right IR
sensors. At the factory setting, they open/close the breeze break door.
Displays the capacity and readability of the balance.
A touchless sensor. When you bring your hand closer, it reacts and the
assigned breeze break door opens/closes (at the factory setting). Refer
to
"4. IR Sensors and Auto
Displays the current date and time.
Refer to the next page.
Displays the set unit.
20
"5.
Application".
Doors".
Devices" and
"10. [Sensitivity Adjustment]
device] screen.
Doors".
"6. Quick
"19. Data
Output".
Advertisement
Table of Contents
