A&D BA-T Series Instruction Manual page 116

Bluetooth
Display settings: MENU key
Bluetooth button
1 Bluetooth mode
2 Connection status
3 Bluetooth data format
4 Back button
Name
1 Bluetooth mode
2 Connection status
Data
3
format
Back button
4
Settings in the red box are default values (factory settings).
Caution on Bluetooth
In the Bluetooth keyboard mode,
use a Bluetooth enabled device (such as a personal computer or smartphone) to perform a paring.
In the Bluetooth keyboard mode, the communication is one way from the balance to the Bluetooth
enabled device.
Only numerical values that represent weighing values are output.
In the Bluetooth serial mode,
you can use the personal computer connection dongle AD8541-PC to enable two-way communication
where commands are sent from your personal computer.
This connection allows WinCT, etc. to communicate.
For details on the data format, refer to
Bluetooth® communication capability is disabled for regions where the balance is not certified as being
compliant with local laws regarding use of Bluetooth® communication.
System settings button
[Bluetooth] screen
Setting value (setting range)
Bluetooth keyboard mode, Bluetooth
serial mode
-
A&D standard format , DP format,
KF format,
NU format,
CSV format
-
"19.2. Weighing data
Communication button
You can change the communication
mode.
The connection status is displayed.
You can select the data format.
MT format,
(This applies when the Bluetooth mode
NU2 format,
is set to [Bluetooth serial mode].)
Returns to the previous screen.
format".
116
Description