A&D BA-T Series Instruction Manual page 30

Normal weighing
Basic weighing
Example weighing in g for BA-6TE
Step 1. Press the ON:OFF key
the HOME key
weighing mode.
Step 2. Place a container (tare) on the weighing
pan if necessary. Press the RE-ZERO
button
zero.
(The decimal separator position depends
on the balance model.)
Step 3. Place a sample on the pan or in the
container. Wait for the stabilization
indicator to be displayed. Read the value.
Step 4. Remove the sample and container
from the weighing pan.
Zero after subtracting the tare
Step 1. If you press the ON:OFF key
placed on the weighing pan to display the weighing value,
zero is displayed after automatically subtracting the tare.
(Zero display after subtracting the tare)
Caution
In the zero display after subtracting the tare, the range
available for weighing becomes narrower than the
maximum display (capacity).
Range available for weighing = Maximum display - Tare
weight
For details about the range available for weighing up to the
capacity in the zero display during sensitivity adjustment when
the screen display is turned on, refer to
and weighing range".
or
to enter
to set the weighing value to
ON:OFF key
Weighing pan
Container (tare)
RE-ZERO button
Sample
with a container (tare)
"5.2.2. Zero-point, tare,
30
or HOME key
Zero display
Weighing
value
Container (tare)
Weighing pan
ON:OFF key
Zero display