A&D BA-T Series Instruction Manual page 167

Peripherals
AD-8127: Multi-functional compact printer
Small dot impact printer that connects with the balance via the RS-232C interface.
Receives and prints data output from the balance in dump printing mode.
AD-1687: Environment logger
A data logger equipped with four sensors for temperature, humidity, barometric pressure and vibration
that can measure and store environmental data
When connected to the RS-232C interface of the balance, the AD-1687 can store environmental data
along with weighing data.
AD-1688: Weighing data logger
When connected to the RS-232C interface of the balance, the AD-1688 can store the data.
Convenient for recording data in places where a personal computer cannot be used.
AD-1689: Tweezers for sensitivity adjustment weight
A pair of tweezers ideally suited for holding sensitivity adjustment weights of 1 g to 500 g.
AX-USB-9P: USB converter
Converts the RS-232C interface to USB.
Driver installation is required.
AD-8529PC-W: Bluetooth converter (for a personal computer connection)
Enables wireless communication between a balance and a personal computer via Bluetooth
10 m.
Driver installation is required.
AD-8529PR-W: Bluetooth converter (for a printer connection)
Enables wireless communication between a balance and a printer via Bluetooth
AX-SW137-PRINT: Foot switch for PRINT (with connector)
Foot switch for PRINT key operations in combination with the BA series.
AX-SW137-REZERO: Foot switch for RE-ZERO (with connector)
Foot switch for RE-ZERO key operations in combination with the BA series.
AX-ION-25: Ionizer
Detached type ionizer.
The instruction manual can be downloaded from our website (https://www.aandd.jp).
AX-BM-NEEDLESET: Discharge electrode units for the ionizer (a set of 4 pcs)
Electrode replacement unit for the ionizer.
When replacing, replace the four pieces at the same time.
The instruction manual can be downloaded from our website (https://www.aandd.jp).
167
up to
up to 10 m.