A&D BA-T Series Instruction Manual page 70

Daily check
Display settings: MENU key
[Daily check] screen, [Environmental conditions] screen (From this screen, display
check items in sequence)
Daily check details
During daily check, you check the minimum required items for using the balance to make sure that there
is no serious error with the balance. It is advisable to perform this check every day before work, though
this may depend on the maintenance level of the balance.
1 Environmental conditions
Make sure that the operating temperature and humidity of the balance fall within the specifications.
If the humidity is 45 %RH or less, it is recommended that static elimination be performed before
weighing.
Be sure to warm up the balance before use for at least an hour, or at least four hours for BA-6TE/6DTE,
with the AC adapter connected to the power supply.
The warm-up time is the period of time when the power to the balance is on before use.
* You can measure up to 9999 hours for the warm-up time.
1 Environmental conditions
2 Check item position
3 Back button
Name
Environmental
1
conditions
Check item position
2
Back button
3
Next button
4
Calibration test/check button
Displays the environmental conditions.
Displays the position of the current check item.
Returns to the [Calibration test/check] screen.
Considers this check item as OK and proceeds to the next item.
Description
70
Daily check button
4 Next button