A&D BA-T Series Instruction Manual page 129

Wired LAN specifications
Connector
Protocol
To use the wired LAN terminal, you must select the setting value in the [Wired LAN] screen.
Refer to "13.15. Wired
Display settings: MENU key
Name
IP address
Subnet mask
Default gateway
Data format
For details on the data format, refer to
Cautions on the wired LAN
For information about the connection to your local area network (LAN), contact your system
administrator.
To connect to a PC directly, use a cross cable.
To connect via a hub, use a straight cable.
Data can be collected by using Windows data communication software "WinCT-Plus".
For details on "WinCT-Plus", refer to
RJ45
TCP/IP
LAN". Settings in a red box are default values (factory settings).
System settings button
Wired LAN button
For setting values, contact your LAN administrator.
A&D standard format , DP format,
MT format,
CSV format
"19.2. Weighing data
"18.4.2 WinCT-Plus (wired
Display unit
Wired LAN terminal
[Wired LAN] screen
Setting value (setting range)
NU format,
format".
LAN)".
129
Communication button
KF format,
NU2 format,