A&D BA-T Series Instruction Manual page 131

Data output method
The operation of the balance can be changed by setting the function table to the settings suitable for the
intended use.
For details on the function table, refer to
Display settings: MENU key
The output method of weighing data via the RS-232C/USB interface can be specified in the [Data output
mode] screen of the function table.
Display settings: MENU key
Table of the data output mode
Item Setting value
Key mode
Data
Auto print mode
output
mode
Stream mode
Interval mode
Settings in a red box are default values (factory settings).
"13.7. Data
System settings button
Data output button
System settings button
Data output button
[Data output mode] screen
Outputs with the PRINT button if the weighing value is stable.
1. Automatically outputs if weighing value is stable. (referencing
zero)
2. Immediately outputs with the PRINT button regardless of
whether or not the weighing value is stable.
3. Immediately outputs with the PRINT button. If weighing value is
not stable, outputs once it has stabilized.
Outputs continually
Starts outputting with the PRINT button at the specified period.
output".
[Data output] screen
Data output mode button
Description
131
Communication button
Communication button