A&D BA-T Series Instruction Manual page 100

Auto door opening/closing distance
1
button
Back button
2
Settings in the red box are default values (factory settings).
BA-T series analytical balances are equipped with auto doors that allow you to open/close the breeze
break without touching the doors.
The positions of the breeze break auto doors are automatically detected by the IR sensors on the
breeze break side surfaces.
At factory settings, the IR sensors on the left and right of the display are assigned to open and close the
breeze break doors.
At factory setting, the position each breeze break door was previously opened to is automatically
detected.
It is also possible to change the function table of the balance for the doors to be fully open or partially
open.
Date/time setting
Display settings: MENU key
[Date/time setting] screen
1 Current date and time
2 Date and time setting
3 Set button
4 Date format
5 Back button
Name
Current date and
1
time
Date and time
2
setting
Set button
3
Date format
4
Back button
5
The balance is equipped with a clock and calendar function. When the settings described in
to be added" are set, the time/date can be added to the weighing value output.
Name
System settings button
Setting value (setting range)
-
-
-
Year/Month/Day ,
Month/Day/Year,
Day/Month/Year
-
Setting value
(setting range)
Full, Half, Set the distance.
-
Displays the currently set date and time.
Input the date and time that you want to set.
Changes the settings for the date/time.
Sets the order of the year, month and day.
Returns to the previous screen.
100
Description
Changes the open position of the
breeze break.
Returns to the previous screen.
Date/time button
Description
"13.9. Data