A&D BA-T Series Instruction Manual page 118

External input switch
Display settings: MENU key
[External input switch settings] screen
1 External input switch 1
2 External input switch 2
3 Back button
Name
1 External input switch 1
2 External input switch 2
Back button
3
Settings in the red box are default values (factory settings).
You can change the function of connected external switches such as a foot switch in the device settings
screen.
These settings allow you to perform operations from external switches.
For the usage and specifications of external input terminals, refer to
(external input switch)".
Initialization
Display settings: MENU key
Perform initialization
This function resets the various settings for the balance to the factory settings. Items to be initialized are
as follows.
Sensitivity adjustment data
Weight values for the sensitivity adjustment and calibration test on your external weight
Setting values in the function table
Standard values for check functions
Unit weight in the Counting mode
100% reference mass in the Percent weighing mode
Items that remain unchanged even if you perform initialization are as follows.
Registered users, user authorization
Date/time
History (login/logout, operation history, sensitivity adjustment history)
Balance information and software version
Caution
Be sure to perform sensitivity adjustment after initializing the balance.
System settings button
Setting value (setting range)
RE-ZERO / PRINT ,
Open/close the right breeze break
door, Open/close the left breeze
break door
-
System settings button
External input switch button
You can change the settings for the
function of connected external switches.
Returns to the previous screen.
"15.4. External input terminal
Initialization button
118
Description