A&D BA-T Series Instruction Manual page 65

Procedure for external sensitivity adjustment
Weighing example for BA-6DTE
Step 1. Make sure that nothing is on the weighing pan
and press the Confirm button
The balance measures the zero point.
Do not apply vibration and the like to the balance.
* You can input the external weight value before input.
Step 2. Place the weight on the weighing pan and press
the Confirm button
Measure the weight.
Do not apply vibration and the like to the
balance.
* You can input the external weight value before input.
Step 3. The [Sensitivity adjustment result] screen for the
external sensitivity adjustment is automatically
displayed. Please remove the weight.
Step 4. You can output the result by pressing the
PRINT button
* The result is automatically output if [GLP output] in
[Data output] is set to ON.
Step 5. Press the HOME key
Place the weight again to confirm that the sensitivity of the balance is adjusted properly.
If it is not within the range, start over from the first step of this procedure in the appropriate
ambient conditions.
.
.
.
to return to the weighing screen.
Weighing pan
Confirm button
External weight
Confirm button
GLP output
65
Result display
PRINT button