Use The Multimeter; Input Terminals; Dmm Menu - Owon TAO 3000 Series Quick Manual

5. Use the Multimeter

Input Terminals

The input terminals are on the Top of the oscilloscope.

DMM Menu

DMM : Push DMM button on the front panel to enter/exit the multimeter function. The
button backlight will be lighted when the multimeter function is enabled.
Select : Push Select button on the front panel to select the multimeter function menu.
The bottom menu of multimeter is as below:
Menu Setting
Current
Voltage
R
C
Hold ON OFF
Configure Relative
5.Use the Multimeter
Multimeter input
Figure 5-1 Multimeter Input Terminals
Figure 5-2 Multimeter Button
ACA Measuring AC current
DCA Measuring DC current
ACV Measuring AC voltage
DCV Measuring DC voltage
Measuring resistance
Testing diode
Testing for continuity
Measuring capacitance
Freeze the display during measurement.
When making relative measurements, reading is the
Multimeter
Button
Description
29