Use The Multimeter; Input Terminals; Dmm Menu - Owon TAO3000 Dual-Channel Series User Manual

5. Use the Multimeter

Input Terminals

The input terminals are on the top of the oscilloscope, which marked as COM,
V/Ω/C.

DMM Menu

Push DMM button on the front panel to enter/exit the multimeter function. The
button backlight will be lighted when the multimeter function is enabled.
Select: Switch between AC and DC when measuring voltage or current; and
switch resistance, continuity, diode, and capacitance measurement when selecting
other.
The bottom menu of multimeter is as below:
Menu Setting
Current
Voltage
R
5.Use the Multimeter
Input connectors of multimeter
Figure 5-1 Multimeter Input Terminals
Figure 5-2 Multimeter Button
ACA Measuring AC current
DCA Measuring DC current
ACV Measuring AC voltage
DCV Measuring DC voltage
Measuring resistance
Testing diode
Testing for continuity
Multimeter
Button
Description
95