Sev - ST STM32H7 Series Programming Manual

PM0214
3.11.9

SEV

Send Event.
Syntax
SEV{cond}
Where:
• 'cond' is an optional condition code, see
Operation
SEV is a hint instruction that causes an event to be signaled to all processors within a
multiprocessor system. It also sets the local event register to 1, see
page 47.
Condition flags
This instruction does not change the flags.
Examples
SEV ; Send Event
The STM32 Cortex-M4 instruction set
Conditional execution on page
PM0214 Rev 9
65.
Power management on
189/262
261