Vmov Register - ST STM32H7 Series Programming Manual

The STM32 Cortex-M4 instruction set
3.10.14

VMOV register

Copies the contents of one register to another.
Syntax
VMOV{cond}.F64 Dd, Dm
VMOV{cond}.F32 Sd, Sm
Where:
•
'cond' is an optional condition code, see
•
'Dd' is the destination register, for a doubleword operation.
•
'Dm' is the source register, for a doubleword operation.
•
'Sd' is the destination register, for a singleword operation.
•
'Sm' is the source register, for a singleword operation.
Operation
This instruction copies the contents of one floating-point register to another.
Restrictions
There are no restrictions
Condition flags
These instructions do not change the flags.
164/262
Conditional execution on page
PM0214 Rev 9
PM0214
65.