Basic Recording - Canon Elura 2 Instruction Manual

2_ELURA2_E(08-32)

Basic Recording

E
3
P
Before you start recording
Have you completed the following steps?
• Attached a power source (
• Removed the lens cap (
• Chosen the display: viewfinder (
• Extended the viewfinder (
• When you're using the viewfinder, fully close the LCD or rotate the LCD so
that it faces the same direction as the lens (
You may also want to install the backup battery (
and time display (
To record
1. Press the button next to the POWER dial and hold, turn the
POWER dial to MOVIE.
• The camera automatically sets to record pause mode. PAUSE appears in the
display.
• The camera power indicator lights up red.
• The confirmation beep sounds.
• The camera will turn itself off if you leave it in record pause mode for more
than about 5 minutes. To return to record pause mode, turn the POWER dial
to OFF and then back to MOVIE.
• For Progressive Scan recording, see p. 48. ELURA2 MC only: For still
image recording to a MultiMediaCard, see p. 93.
2. Load a cassette (
16
7/25/00 17:03 Page 16
11).
116).
116) /adjusted the LCD screen (
45).
14).
1
4, 5
116) or LCD screen (
23).
119) in order to set the date
MOVIE
21)
21)