S-video terminal input/output
LANC u u terminal
Weight and dimensions are approximate.
Erorrs and omissions excepted.
Subject to change without notice.
If your TV (or VCR) has an S (S1) -video input terminal
For higher picture quality, we recommend playing back recordings on a TV with
an S (S1) terminal. If you connect the camera to a TV with an S1 terminal or the
Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
• Attach the DU-300 Docking Unit in order to use the S-video terminal (
• Use the S-150 S-video Cable to connect the S-video terminals. Use the
STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the
white plug to the white AUDIO terminal L (left). Connect the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
• If you are connecting the camera to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
1 Vp-p (Y signal), 0.286 Vp-p (C signal)
ø 3.5 mm stereo minijack, –57 dBV (with
600 ohm mic)/at least 5 kohms
ø 3.5 mm stereo minijack
ø 2.5 mm mini minijack
3 × 1
S-150 S-video Cable
STV-250N Stereo Video Cable
in (77 × 29 × 56 mm)
oz (50 g)