Figure 5-11 Inhibit And Esd Setup - Emerson Bettis TEC2 Installation And Operation Manual

Installation and Operation Manual
E2K-405-0218 Rev. 2
Figure 5-11 Inhibit and ESD Setup
INHIBIT & ESD
SETUP?
NO
Go to
Next Figure 5-12
Customizing Actuator Settings
All manuals and user guides at all-guides.com
Figure 5-11 Inhibit & ESD Setup
Open Inhibit
YES
<Yes=On;
No=Off>
YES
Close Inhibit
<Yes=On;
No=Off>
YES
Hard Wired ESD
<Yes=On;
No=Off>
YES
Remote ESD
<Yes=On;
No=Off>
YES
Lost Com ESD
<Yes=On;
No=Off>
YES
<ValvePos=
Stayput,
Open, Close> On ESD
<Yes=Off; No=On>
YES
Section 5: Customizing Actuator Settings
ESD Override On
Thermal
<Yes=Off; No=On>
YES
ESD Override
On Local:
<Yes=Off;
No=On>
YES
ESD Override
On Stop:
<Yes=Off;
No=On>
YES
ESD Override
On Inhibit:
<Yes=Off;
No=On>
YES
ESD Override
On Torque:
<Yes=Off;
No=On>
YES
NO
ESD
Delay
YES
Go to
Next Figure 5-4
February 2018
0-60mSec
in 0.25
increments
57