Table of Contents
Advertisement
Section 5: Customizing Actuator Settings
February 2018
NOTE:
Host Control means the control of this relay has been given to the network if a
Controlinc card has been installed. The relay will not function if the Controlinc card
is not installed. Flashing means the output will cycle ON and OFF in one-second
intervals while the function is active.
Table 5-2.
• LSO (Open limit)
• LSC (Close limit)
• LSA (Intermediate limit A) • STOP (SS OFF)
• LSB (Intermediate limit B) • REMOTE
• OPENING
• CLOSING
• MOVING
*Only available for Relays 3 and 4.
54
All manuals and user guides at all-guides.com
Relay Output Function List
• LOW BATTERY
• LOCAL
• OPEN TORQUE
• CLOSE TORQUE • OPEN INHIBIT
• OVER TORQUE
(Open or Close)
Installation and Operation Manual
E2K-405-0218 Rev. 2
• VALVE STALL
• LOCAL ESD
• VALVE DRIFT
(MOVED BY
• ESD ACTIVE
HANDWHEEL)
• LOST POWER
• LOST ANALOG
• MOTOR
• ACTUATOR FAIL
OVERLOAD
• HOST CONTROL
• LOST PHASE
(Controlled by
Network)
• LOST COM
A/B
• CLOSE INHIBIT
• UNIT ALARM
• Partial Stroke
Test (PST)*
Customizing Actuator Settings
Advertisement
Table of Contents
