Table of Contents
Advertisement
Installation and Operation Manual
E2K-405-0218 Rev. 2
Section 1: Important Notes
1.1
User Safety
Safety notices in this manual detail precautions the user must take to reduce the risk of
personal injury and damage to the equipment. The user must read these instructions in
their entirety. Failure to observe these safety notices could result in serious bodily injury,
damage to the equipment, void of the warranty, or operational difficulty.
Safety notices are presented as follows:
WARNING:
Alerts user of potential danger; failure to follow the warning notice could result in serious
personal injury or death.
CAUTION:
Identifies precautions the user must take to avoid personal injury or equipment damage.
NOTE:
Highlights information critical to the user's understanding of the TEC2 valve actuator
installation or operation.
1.2
Purpose
This installation and operation manual explains how to install, operate, and maintain the
TEC2 valve actuator.
TEC2 actuators are intended for automating part-turn and multi-turn valves within the
specified torque ranges for given model.
WARNING:
Read this manual in its entirety before installing, operating, or performing
maintenance on the TEC2 valve actuator.
Use caution when working on, with, or around valves and actuators.
High pressures, forces, voltages, and flammable media can be present.
Failure to follow instructions for proper electrical wiring, storage, setup, and
maintenance may cause serious injury, damage equipment, or void warranty.
Installation, Operation and Maintenance should only be performed by
qualified personnel.
Important Notes
All manuals and user guides at all-guides.com
Section 1: Important Notes
February 2018
1
Advertisement
Table of Contents
