Figure 5-10 Discrete Output Setup - Emerson Bettis TEC2 Installation And Operation Manual

Installation and Operation Manual
E2K-405-0218 Rev. 2
Figure 5-10 Discrete Output Setup
DISCRETE
Relay #1
<trigger>
OUTPUT SETUP?
YES
NO
BACK
Increment thru list
of relay triggers
(see list below)
Relay #3
<trigger>
NO
Increment thru list
Go to
of relay triggers
Figure 5-4
(see list below)
Relay #5
<generic / monitor>
NO
Increment Relay #5
Choice as:
Generic or Monitor
NOTE:
*Only available for Relays 3 and 4.
Customizing Actuator Settings
All manuals and user guides at all-guides.com

Figure 5-10 Discrete Output Setup

BACK
NEXT
Relay #1 Relay #1
<N.O. / N.C.> <cont / ash>
YES YES
NO NO
Increment Relay
Increment Relay Continuous
Normally Open / Close Choice:
or Flashing Choice:
N.O. or N.C.
Continuous or Flashing
Relay #3 Relay #3
<N.O. / N.C.> <cont / ash>
YES YES
NO NO
Increment Relay
Increment Relay Continuous
Normally Open / Close Choice:
or Flashing Choice:
N.O. or N.C.
Continuous or Flashing
Relay #5 ARM Installed?
<cont / ash>
YES YES
NO
Increment Relay Continuous
Relays #9 to #12 are
or Flashing Choice:
configured the Same
Continuous or Flashing
as #1 to #4
List of Relay Triggers:
LSO LOCAL Close Inhibit
LSC Stop Local ESD
LSA Remote Any ESD
LSB Valve Drift Lost AIN#1
Opening Lost Power Lost AIN#2
Closing Lost Phase Generic
Open Torque Motor Overload Moving
Close Torque Open Inhibit
Section 5: Customizing Actuator Settings
Relay #2 Relay #2
<trigger> <N.O. / N.C.>
YES YES
NO NO
Increment thru list Increment Relay
of relay triggers Normally Open / Close Choice:
(see list below) N.O. or N.C.
Relay #4 Relay #4
<trigger> <N.O. / N.C.>
YES YES
NO NO
Increment thru list Increment Relay
of relay triggers Normally Open / Close Choice:
(see list below) N.O. or N.C.
LSA Position
><xx>%
NO
YES
NO
Increment Position
1-99% in
Steps of 1%
Over Torque
Valve Stalled
Low Battery
Monitor
PST*
Actuator Fail
February 2018
Relay #1
<cont / ash>
YES YES
NO
Increment Relay Continuous
or Flashing Choice:
Continuous or Flashing
Relay #4
YES <cont / ash> YES
NO
Increment Relay Continuous
or Flashing Choice:
Continuous or Flashing
LSB Position
YES <<xx>% YES
NO
Increment Position
1-99% in
Steps of 1%
55