Electrical Connections; Remove Separate Terminal Chamber (Stc) Cover; Figure 3-2 Removal Of Stc Cover - Emerson Bettis TEC2 Installation And Operation Manual

Installation and Operation Manual
E2K-405-0218 Rev. 2
3.3

Electrical Connections

3.3.1

Remove Separate Terminal Chamber (STC) Cover

Verify power is disconnected before removing STC Cover.
Multiple power sources may exist under the cover.
NOTE:
Valve actuator requires a circuit breaker within the line of sight, sized for the
motor currently specified on the nameplate.
See Appendix Section A.7, for the circuit breaker options.
Remove cover with a strap wrench, drift, or pinch bar by rotating the
cover counterclockwise.
Figure 3-2
Installation
All manuals and user guides at all-guides.com
WARNING: BEWARE OF MULTIPLE POWER SOURCES
Removal of STC Cover
Model 500 Enclosure
Section 3: Installation
TEC2000/TEC2 Enclosure
February 2018
11