Table of Contents
Advertisement
6.
Connect the TCP/IP cable to the Site Supervisor and to the laptop. The connection status light should be illuminated solid and the communications light
should be flashing. Open an Internet browser and in the address bar, enter http:// followed by the IP address assigned to the Site Supervisor. Then press
Enter.
Logging Into the Site Supervisor Controller
When the Site Supervisor is powered up for the first time, the first screen displayed after initialization is the Home screen. The default Username is user
and the default Password is pass. Depending on your permission settings, once logged in, the Username and Password can be changed by clicking the
Main Menu icon in the upper left corner and selecting Manage Users.
Setup Wizard
If your unit has been received directly from the Emerson factory, the Setup Wizard will open and take you through the following setup screens:
Figure 5 - Enter Assigned IP Address in Browser
Figure 6 - Login Screen at Controller Startup
Advertisement
Table of Contents
