Table of Contents
Advertisement
Pushing
programming
7.1
KEY COMBINANTION
KEY
+
+
+
8
FIRST INSTALLING
8.1
ON BOARD CLOCK (OPTIONAL)
In case of power failure the time and date are maintained for about 3 days (at room temperature 25 °C); the
display shows the message "rtC" and it is necessary to set the clock.
8.2
RTC SETUP
1.
Push Menu key continuously for 3 seconds until the bottom display shows "Hour" and the top display
shows its value.
2.
Push SET one time: the value is blinking.
3.
Use the Up and Down keys to adjust it. Push SET one time to confirm.
4.
Push up or down keys and repeat the operations 2. 3. and 4. for all the RTC parameters:
-
Min: minutes (0÷60)
-
UdAy: day of the week (Sun = Sunday, Mon =Monday, tuE =Tuesday, UEd = Wednesday, tHu =
Thursday, Fri =Friday, SAt =Saturday)
-
dAy: day of the month (0÷31)
-
MntH: month (1÷12)
-
yEAr: year (00÷99)
1592022020 Quick reference guide iCHILL 100DEVO rel. 1.0
once
during
ACTION
Push for 3 seconds together
Only in Pr3 level: push SET and
DOWN key
Push once together
Push 5 seconds in heat pump
mode
Only in Pr3 programming level:
push SET and then the MENU key
the
To exit from a group of parameters
Enter the programming parameters
Select the parameter level visibility Pr1 / Pr2 / Pr3
Exit the programming parameters
Manual defrost
In Pr3 defines if the parameter can be modified or
not in the other levels.
FUNCTION
12/40
Advertisement
Table of Contents
