Setup Wizard - Emerson Copeland Site Supervisor Controller Quick Setup Manual

Setup Wizard

Note that if setpoints have been pre-loaded in the unit, the Setup Wizard will not auto-start after
logging in.
If your unit has been received directly from the Copeland factory, the Setup Wizard will open and take you
through the following setup screens:
Localization Screen
Localization Screen
Set the E3's localization data such as language, date and time formats, and engineering units from the
Localization screen.
Language : The default for the language selection is American English (United States). The system stores
a setting for the preferred system language (internal language code). The default language is used when
no user is currently logged into the E3 or when the currently active preferred language does not have a
translation for a given label, prompt, or display text.
Date : The Date format can be set to either Day, Month, and full Year (D-M-YR) or Month-Day and full Year
(M-D-YR) format. The day, month, and year values are separated by either a forward slash or a dash line
depending on user selection.
The Date Format can be changed based on user preference and saved to user profiles. On initial E3 startup,
the Date format defaults to the format of the language selected. For example, en-US will default to D-M-YR and
all others will default to M-D-YR.
Time : The Time format can be set to either a 12-hour (12-hr) format or 24-hour (24-hr) format. The hour,
minute, and second values are separated by either a colon or a period depending on user selection.
The Time format can be changed based on user preference and saved to user profiles. On initial E3 startup,
the Time format defaults to the format of the language selected.
Date and Time delimiters default to forward slashes and colons.
Engineering Units
:The default engineering units are based on the assigned units for the chosen preferred
language. Users can choose or change their preferred set of engineering units and save them to their user
profiles.The default engineering units are based on the International System of Units (SI System) format.
Set the system language type in the Language drop-down menu. Click the right arrow > to save and proceed
to the System Values screen.
10