Table of Contents
Advertisement
Section 7: Maintenance
February 2018
Figure 7-1
7.5
Lifting
Lifting eye should never be used for lifting and moving any TEC2 actuator.
TEC2 actuators should be moved using straps.
7.6
Battery Disposal
Proper local battery disposal protocol should be followed.
7.7
Cleaning of LDM
Actuator external surfaces can be cleaned with water and/or mild detergent.
7.8
Improper Use
If actuator is not used in a manner specified in this manual, the protection provided by
the equipment may be impaired.
7.9
Battery Replacement – "Clicker"
1.
Insert a coin in the slot on the right hand corner of the key ring end and twist.
2.
Slide battery to remove.
3.
Replace battery with Panasonic Part No. CR2031 or equal.
80
All manuals and user guides at all-guides.com
Fuses in the STC
Installation and Operation Manual
E2K-405-0218 Rev. 2
Maintenance
Advertisement
Table of Contents
