Toshiba THL Series Instruction Manual page 73

1) Remove the Arm 2 cover. The cover is fastened to Arm 2 and the harness guide
with four (4) hexagon socket head bolts (M3 x 16) and ten (10) cross recessed truss
head screw (M3 x 10 x 2 pcs. and M3 x 6 x 8 pcs.). It is recommended to lower
Axis 3 in advance until the upper limit stopper of the ball screw enters the cover.
Hexagon socket head bolts
M3 x 16 x 4 pcs.
Arm 2 cover
Fig. 7.5 Removing the Arm 2 Cover (THL300 and THL400)
TRANSPORTATION AND INSTALLATION MANUAL
73
Cross recessed truss head screw
M3 x 10 x 2 pcs.
Cross recessed
truss head screws
M3 x 6 x 8 pcs.
STE 85356