Toshiba THL Series Instruction Manual page 63

• The wire to be used should be such that can well withstand the mass of the robot.
• When lifting up the robot, it may tilt a little. Lift it up slowly.
• Lifting up and down should be performed carefully so that any impact cannot be exerted
on the robot.
• When carrying the robot by workers, take careful precautions to prevent their hand or leg
from being caught in the robot.
DO NOT hold the ball screw
spline shaft.
TRANSPORTATION AND INSTALLATION MANUAL
!
CAUTION
DO NOT hold the cover
Fig. 6.8 Robot Handling Locations
63
Handling areas (shaded areas)
DO NOT hold the cable.
STE 85356