1) Remove the Arm 2 cover. The cover is fastened to Arm 2 and the harness guide
with 14 hexagon socket head bolts (M3 x 6 x 4 pcs., M4 x 6 x 8 pcs. and M4 x 10 x 2
pcs.)
Hexagon socket head bolts
M3 x 6 x 4 pcs.
Recommended tightening torque:
1.47 N・m
Fig. 9.6 Removing the Arm 2 Cover (THL800, THL900 and THL1000)
TRANSPORTATION AND INSTALLATION MANUAL
Nylon washer
Arm 2 cover
Hexagon socket head bolts
M4 x 10 x 2 pcs.
Recommended tightening torque:
1.47 N・m
106
Hexagon socket head bolts
M4 x 6 x 8 pcs.
Recommended tightening torque:
1.47 N・m
STE 85356