Toshiba THL Series Instruction Manual page 120

e) Allocate a clearance of about 250 mm in front of the controller for connecting the
robot cable connecto
(250)
(250)
Fig. 10.5 Clearance of controller front side (TSL3000)
• If the control panel is completely sealed up, open air release holes, ventilate the air
forcibly with a fan, or conduct indirect cooling to release heat from the control panel.
Otherwise, heat will be confined in the control panel and the controller, causing failure.
TRANSPORTATION AND INSTALLATION MANUAL
r.
!
CAUTION
120
304
304
STE 85356