Toshiba THL Series Instruction Manual page 5

•
Always read through the Safety Manual provided separately before starting
actual work to ensure safety work covering from the robot installation to
operation.
[Installation and transportation]
Always observe the following items to safely use the robot.
•
•
Prohibited
•
•
•
Mandatory
•
•
•
Always
ground
TRANSPORTATION AND INSTALLATION MANUAL
!
!
DO NOT install or operate if any parts are damaged or missing.
Doing so could lead to electric shocks, fires or faults.
DO NOT install the robot where it may be subject to fluids such
as water. Doing so could lead to electric shocks, fires or
faults.
Do not place the robot near combustible matters. Doing so
could lead to fires if the matter ignites due to a fault, etc.
Always secure the robot with the attached clamps before
transporting it. Failure to do so could lead to injuries if the arm
moves when the robot is suspended (for THL500 to THL1000).
Wire the robot after installation.
Wiring the robot before installation could lead to electric shocks
or injuries.
Always use the power voltage and power capacity designated
by Toshiba Machine. Failure to do so could lead to device
faults or fires.
Always use the designated power cable. Using a cable other
than that designated could lead to fires or faults.
Completely connect the grounding cable. Failure to do so
could lead to electric shocks or fires if a fault or fault current
occurs. Noise could lead to malfunction.
Also, it could cause misoperation by noise.
CAUTION
DANGER
5
STE 85356