Toshiba THL Series Instruction Manual page 154

• Unless the signals of SVOFF and emergency stop contacts 1, 2 are jumpered, the controller
servo power cannot be turned on.
• Unless the CYCLE signal is jumpered, the controller enters the cycle operation mode.
• Unless the LOW_SPD signal is jumpered, the robot is operated at low speed during
automatic operation.
• Unless the STOP signal is jumpered, automatic operation of the robot is not possible.
• Unless the BREAK signal is jumpered, automatic operation of the robot is not possible.
TRANSPORTATION AND INSTALLATION MANUAL
!
CAUTION
154
STE 85356