2) Loosen the fixing bolts of the mechanical stoppers, move the mechanical stoppers
to a desired position, and fix them again. When fixing the mechanical stoppers, be
sure to apply Loctite to the fixing bolts.
Upper limit mechanical stopper
(Note that the thin head type hexagon bolt
different from the lower limit mechanical
stopper is used as a fixing bolt. If a normal
bolt is used for mistake, the cover may be
damaged by interference.)
Upper limit mechanical
stopper fixing bolt
M5 x 16 x 1 pc.
Ball screw spline shaft
Lower limit mechanical stopper
Fig. 9.7 Checking Software Limit Change (THL800, THL900 and THL1000)
TRANSPORTATION AND INSTALLATION MANUAL
107
STE 85356