Fixing The Base (Optional) - Vatech PaX-i3D Smart Installation Manual

4.5

Fixing the base (Optional)

Concrete floor
Anchor bolts
Hammer drill
Hammer
Ratchet wrench
Pax-i3D Smart(PHT-30LFO) Installation Manual
M8 Size
Part No. : 34
2PCS
L=200mm7.9
4 Installing the Equipment: Floor Standing (Optional)
1. Before installing the equipment, put the
base unit on the installation site and mark 2
locations on the floor.
2. Drill the floor holes of size 12mm x 30mm
(depth) using the concrete hammer drill.
3. Remove the debris and clean the holes using
the dust pump.
59