Vatech PaX-i3D Smart Installation Manual page 65

Leveling right and left
Leveling the front and back
Pax-i3D Smart(PHT-30LFO) Installation Manual
4 Installing the Equipment: Floor Standing (Optional)
1. Place the spirit level, as shown in the figure..
2. Adjust the base until the bubble on the spirit
level centers in the middle, by turning left and
right screws clockwise or vice versa.
3. Place the spirit level on the vertical frame, as
shown in the following figure.
4. Adjust the screws until bubble of spirit level
centers (level), by turning the front and/or
back screws clockwise or vice versa.
65