Vatech PaX-i3D Smart Installation Manual page 121

Selecting an Announcement Mode: Music or Beep (Optional)
When the need to select an announcement between music and beep arises, take following procedures.
Commands specifications:
XXXX Imaging Modes
0000
0001
0002
(Default)
1. Send the command in accordance with the command specification, as specified in the table above.
Here are some examples.
Default mode: 0002(b eep) for each imaging mode.
When the same music announcement is desired for CT and PANO imaging modality.
Enter the command [SPM_MPOP_0001] in the command field, followed by Send.
Pax-i3D Smart(PHT-30LFO) Installation Manual
Command format: [SPM_MPOP_XXXX]
Announcement mode
CT/PANO
CT/PANO
CT/PANO
Music Different for each mode
Music The same for each mode
Beep The same for each mode
8 Installing Software
Division
121