Vatech PaX-i3D Smart Installation Manual page 56

4 Installing the Equipment: Floor Standing (Optional)
Marking 4 points on the wall
56
Wrench bolts
Nuts
Variable
distance
2. Combine the column and wall brackets in the
following manner with the 2 wrench bolts.
Allen wrench 6 mm/0.24"
Monkey
wrench
M8 x 25 w/
spring and
WRENCH
flat washers
BOLTS
Part No.: 35
2 PCS
Part No.: 35
NUTS
2 PCS
Do not tighten the bolts fully yet.
1. Move the equipment to the installation site as
close as possible
2. Adjust the distance between the wall and
equipment by moving it slightly, so that the
wall bracket touches the wall.
Pax-i3D Smart(PHT-30LFO) Installation Manual