Vatech PaX-i3D Smart Installation Manual page 107

8 Installing Software
Interfacing EasyDent with imaging program(one-time linking)
1. From the main screen of EasyDent, click the Help menu and select Configuration.
2. Click the Program tab.
3. Check ' Select capture mode for Dental CT' select the NCSW.
4. Click Apply
5. When the following message appears, click OK to restart the program.
6. Re-run the EasyDent program and check the change has been reflected.
107
Pax-i3D Smart(PHT-30LFO) Installation Manual