Before Beginning - Vatech PaX-i3D Smart Installation Manual

8 Installing Software
If the PC system is supplied with the equipment, the software is already
installed. Disregard this section.
8.1

Before Beginning

Ensure that the emergency stop switch is in OFF position prior to starting
installShield installation.
The image viewer program such as EasyDent or the one from the 3rd party
should be installed in advance of the InstallShield installation. For the
information on their installation procedures, refer to their respective manuals.
Before InstallShield installation, ensure that the video card driver installed
on PC is the most up-to-date version. To check this, go to the Website: www.
nvidia.com
Perform virus scan for the PC and InstallShield program with the anti-virus
program prior to proceeding with its installation.
Do not install the programs irrelevant to image acquisition and view together
with imaging program on the same PC. There may be subtle conflicts between
them.
94
Pax-i3D Smart(PHT-30LFO) Installation Manual