Table of Contents
Advertisement
Section 3 - Operation
3.6 Operator's Responsibility
It is the responsibility of the operator, prior to each work
shift, to perform the following:
1. Visual and Daily Maintenance Inspections
•
are designed to discover any damage of
components before the aerial platform is put into
service.
•
are done before the operator performs the function
tests.
Failure to locate and repair damage, and
discover loose or missing parts may
result in an unsafe operating condition.
2. Function Tests
•
are designed to discover any malfunctions before
the aerial platform is put into service.
IMPORTANT
The operator must understand and follow
the step-by-step instructions to test all
aerial platform functions.
The operator should make a copy of the Operator's
Daily Inspection Checklist (see
the visual and daily maintenance inspections and the
function tests sections while performing the items
outlined in
Section 2.3
IMPORTANT
If aerial platform is damaged or any
unauthorized variation from factory-
delivered condition is discovered, aerial
platform must be tagged and removed
from service.
SJ 82T & SJ 86T
WARNING
Table
4.7) and fill out
and
Section
2.4.
Repairs to the aerial platform may only be made by
qualified/competent repair personnel. After repairs are
completed, the operator must perform visual and daily
maintenance inspections & function tests again.
Scheduled maintenance inspections shall only be
performed by a qualified/competent person.
Operator's Responsibility
Page 57
Advertisement
Table of Contents
