Section 2 - Familiarization
Cable Springs
Jib
Rotary Actuator
E-Chain
2.3-11 Rotary Actuator
-
Ensure there are no loose or missing parts and
there is no visible damage.
-
Ensure all bolts and pins are properly tightened.
-
Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
2.3-12 Jib (If Equipped)
-
Ensure there are no loose or missing parts and
there is no visible damage.
-
Ensure all bolts and pins are properly tightened.
-
Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
2.3-13 Boom
-
Ensure there are no loose or missing parts and
there is no visible damage.
-
Ensure all bolts and pins are properly tightened.
-
Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
SJ 82T & SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Wear Pad
Lift Cylinder
contained in this operating manual and on the aerial platform.
Visual & Maintenance Inspection
Boom
Wear Pad
•
Cylinders
-
Ensure all cylinders are properly secured
and there is no evidence of leakage.
•
Wear Pads
-
Ensure all bolts are tight, there is no visible
damage to the wear pads and that no parts
are missing.
•
Hoses
-
Ensure all hoses are properly tightened
and there is no evidence of hydraulic
leakage.
•
E-Chain
-
Ensure there are no loose or missing parts
and there is no visible damage.
•
Cables
-
Ensure there are no loose or missing parts
with no signs of visible damage.
-
Ensure that nuts are not loose and are
locked together.
-
Ensure that there are no gaps between
cable springs (see
are gaps, tighten nuts to remove gaps
and then add another half turn more.
With Gaps
Figure 2-8. Cable Springs
Cable Springs
Figure
2-8). If there
No Gaps
Page 29