Skyjack SJ82T Operating Manual page 91

Section 5
Control Compartment
1
No. Label Pictorial
1
SJ 82T & SJ 86T
Base Control Console
Push " " breaker back in to reset. Select and hold
" " to enable error blink code for engine control unit (ECU).
Read " " operating manual.
Push and hold " " to start engine, "
power unit or " " to enable base control functions.
Select " " to rotate platform to the left or "
Select " " to tilt platform up or "
Select " " to move jib up or "
Select " " to rotate turret to the left or "
Select " " to raise main boom or "
Select " " to extend fly boom or "
Select " " to turn engine off, "
or " " to enable platform control console.
Push " " emergency stop to stop engine and disable controls.
Description
" to enable the emergency
" to rotate to the right.
" to tilt platform down.
" to move jib down.
" to rotate to the right.
" to lower main boom.
" to retract fly boom.
" to enable base control console
Labels
Page 93