Skyjack SJ82T Operating Manual page 43

Section 2 - Familiarization
High Capacity Indicator Light
10. Pull out " "emergency stop button.
Result: Aerial platform should automatically
reset to "high" platform capacity zone.
High capacity zone indicator light and
capacity zone border light should flash.
11. Select "
unit switch.
Result: : High capacity zone indicator
light and capacity zone border light should
flash. All boom and steer functions should
operate, except for "
" " extend.
SJ 82T & SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Capacity Zone Platform Capacity
Border Light Selector Switch
" from emergency power
" lower and
contained in this operating manual and on the aerial platform.
Platform Leveling Override Switch
Low Capacity Indicator
Light
12. Pull and select "low" platform capacity
from platform capacity selector switch.
Result: Capacity zone border light and
high capacity zone indicator light should
turn off. Low capacity zone indicator light
should illuminate.
13. Depress and hold footswitch.
14. Select "
unit switch and activate each boom
function.
Result: Low capacity zone indicator light
should remain illuminated. All boom and
steer functions should operate. Drive
functions should not operate.
Function Tests
" from emergency power
Page 43