Table of Contents
Advertisement
Section 2 - Familiarization
Base
Drive Axle
Wheel/Tire
Assembly
Refer to
Table 4.5
for wheel/tire specifications.
WARNING
Intermixing tires of different types or
using tires of types other than those
originally supplied with this equipment
can adversely affect stability. Therefore,
replace tires only with the exact Skyjack-
approved type. Failure to operate with
matched approved tires in good condition
may result in death or serious injury.
•
Swing Drive Motor
Inspect from underneath the aerial platform.
-
Ensure there are no loose or missing
parts and there is no visible damage.
-
Ensure all bolts are properly tightened.
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
•
Steer Cylinder Assembly
Inspect from underneath the aerial platform.
-
Ensure steer cylinder assembly is
properly secured, there are no loose
or missing parts, all fittings and hoses
are properly tightened and there is no
evidence of hydraulic leakage.
SJ 82T & SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Tie Rod
Turret Rotation
Limit Switch
Swing Drive
Rotary
Motor
Manifold
contained in this operating manual and on the aerial platform.
Visual & Maintenance Inspection
Gear
Turret Transportation
Lock
•
Turret Rotation Gear
Inspect from underneath the aerial platform.
-
Ensure there are no loose or missing
parts and there is no visible damage.
•
Rotary Manifold
Inspect from underneath the aerial platform.
-
Ensure all hoses are properly tightened
and there is no evidence of hydraulic
leakage.
Steer Cylinder
Assembly
Oscillating
Cylinder
Assembly
Page 27
Advertisement
Table of Contents
