Skyjack SJ82T Operating Manual page 25

Section 2 - Familiarization
Control Compartment
Base Control
Console
2.3-6 Control Compartment
-
Ensure all compartment latches are
secure and in proper working order.
• Base Control Console
-
Ensure all switches are returned to their
neutral positions.
-
Ensure there are no loose or missing
parts and there is no visible damage.
• Hydraulic Tank
-
Ensure hydraulic filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
• Hydraulic Oil
-
Be sure that the boom is in the stowed
position, and then visually inspect the
sight gauge located on the side of the
hydraulic oil tank.
-
The hydraulic oil level should be between
the minimum and maximum marks on
the sight glass. Add oil as needed. Refer
to Table 4.2b
• Hydraulic Return Filter
-
Ensure filter element is secure.
-
Ensure there are no signs of leakage or
visible damage.
SJ 82T & SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Hydraulic Tank
Brake Manifold
for recommended oil type.
contained in this operating manual and on the aerial platform.
Visual & Maintenance Inspection
Hydraulic Return Filter
Main Manifold Emergency Power Unit
• High Pressure Filter
-
Ensure housing is secure and shows no
visible damage or leakage.
• Brake and Main Manifolds
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
-
Ensure there are no loose wires or
missing fasteners.
• Emergency Power Unit
-
Ensure there are no loose or missing
parts and there is no visible damage.
-
Ensure there are no loose wires or
missing fasteners.
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
• Fuel Tank
Before using your aerial platform ensure
there is enough fuel for expected use.
-
Ensure fuel filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of fuel leakage.
High Pressure
Filter
Fuel Tank
IMPORTANT
Page 25