Table of Contents
Advertisement
Section 3 - Operation
3.7-2
To Rotate Platform Using Base Control
Console
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push platform rotation switch to either "
"
" right position. Release switch to stop.
3.7-3
To Rotate Turret Using Base Control
Console
When rotating the turret, ensure that there
are no personnel or obstructions in the
path of rotation, including blind spots.
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push turret rotation switch to either "
clockwise or "
Release switch to stop.
Turret
can
be
360 degrees.
3.7-4
To Move Jib Up and Down Using Base
Control Console (If Equipped)
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push jib up/down switch to either "
"
" down position. Release switch to stop.
SJ 82T & SJ 86T
" by selecting and
WARNING
" by selecting and
" counterclockwise position.
NOTE
rotated
continuously
" by selecting and
3.7-5
To Raise or Lower Main Boom Using Base
Control Console
Select desired platform capacity using
platform capacity selector switch. High
platform capacity is automatically selected.
" left or
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push main boom raise/lower switch to either
"
switch to stop.
3.7-6
To Extend or Retract Fly Boom Using Base
Control Console
Select desired platform capacity using
platform capacity selector switch. High
platform capacity is automatically selected.
"
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push fly boom extend/retract switch to either
"
switch to stop.
3.7-7
To Level Platform Using Base Control
Console
1.
Activate function enable "
holding start/function enable/emergency power
switch to function enable position.
2.
Push platform leveling override switch to either
" up or
"
switch to stop.
NOTE
" raise or "
" lower position. Release
NOTE
" extend or "
" retract position. Release
" up or "
" down position. Release
Start Operation
" by selecting and
" by selecting and
" by selecting and
Page 59
Advertisement
Table of Contents
