Table of Contents
Advertisement
Chassis Tilt
3.10 Chassis Tilt
This section guides the operator with regard to
recovering from an inclined position.
IMPORTANT
When the boom is raised or extended, the
aerial platform must only be operated on
firm, level surfaces.
If the aerial platform becomes tilted
causing the alarm to sound, the platform
must be fully lowered and retracted
immediately. Drive functions are not
available when the tilt alarm is active.
Page 68
WARNING
Figure 3-16. Counterweight Uphill
Figure 3-17. Counterweight Downhill
3.10-1 Counterweight Uphill
If the aerial platform becomes tilted with the counterweight
uphill (refer to
Figure
3-16) follow the steps below to
return to a lowered and retracted position.
1.
Retract the boom completely.
2.
Drive to a firm, level surface.
3.10-2 Counterweight Downhill
If the aerial platform becomes tilted with the counterweight
downhill (refer to
Figure
return to a lowered and retracted position.
1.
Lower the jib to horizontal (if equipped).
2.
Retract the boom completely.
3.
Lower the boom completely.
4.
Drive to a firm,level surface.
Section 3 - Operation
3-17) follow the steps below to
SJ 82T & SJ 86T
Advertisement
Table of Contents
