Table of Contents
Advertisement
Control Functions
2.2-11 Platform Control Console (Continued)
1
22
8.
Torque Switch - This switch selects "
or "
" high torque. Select "
(higher speed) or "
speed). Select "
on a slope.
9.
Low/High Throttle Switch - This switch allows
selection between "
engine throttle speeds.
10.
Drive/Steer Controller - This single-axis lever
controls driving "
" forward or "
The rocker switch controls steering "
"
" right. Internal springs return it to neutral
when released.
11.
Differential Lock Switch - This momentary switch,
when pushed forward and then released, engages
"
" differential lock and turns differential light
on. When pulled backward and then released,
disengages "
" differential lock and turns
differential light off.
Page 20
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
2
3
4
21
19 18
20
17
Figure 2-7. Platform Control Console
" low
" low torque
" high torque (lower
" high torque when driving
" low and "
" high
" backward.
" left or
contained in this operating manual and on the aerial platform.
5
6
7
16
15
13
14
12
12.
Jib Up/Down Switch - This switch controls
"
" up or "
13.
Function Speed Adjuster Dial - This variable-
speed adjuster "
extension/retraction, jib raising/lowering and
platform rotation movements. This is used with
switches 12, 14 and 20.
14.
Boom Extend/Retract Switch - This switch
controls "
fly boom.
15.
Low Capacity Zone Indicator Light - Indicates
aerial platform is in "low" platform capacity zone.
Refer to
Table 4.4.
16.
Platform Capacity Selector Switch - This two
position switch allows the operator to select either
"high" or "low" platform capacity.
17.
Platform Leveling Override Switch - This switch
overrides automatic leveling of platform and
controls "
of platform.
Section 2 - Familiarization
8
9
11
10
" down movement of jib.
" controls speed of fly boom
" extension or "
" retraction of
" tilting up or "
" tilting down
SJ 82T & SJ 86T
Advertisement
Table of Contents
