DMC Optical
Thermo Scientific
The DMC Optical Bench consists of an optical bench, a bracket, and a
DMC board.
Bench
Figure 7–34. DMC Layout
Use the following procedure to remove the DMC from the instrument
case. It is easier to do the following by removing the DMC first then
remove and replace the following as necessary.
Optical Bench removal
●
Optical switch replacement, purge wheel housing removal, filter wheel
●
replacement, motor replacement, filter wheel and motor alignment
Heater Assembly removal
●
Pre-Amp/Detector Assembly removal
●
IR Source removal
●
Servicing
DMC Optical Bench
48iQ Instruction Manual
7-29