Measurement Settings - Thermo Scientific 48iQ Instruction Manual

Operation
Settings
Measurement
3-72 48iQ Instruction Manual
The Measurement Settings menu contains a number of submenus where
instrument parameters and settings can be read and modified.
Settings
The following screens show the measurement settings in single range mode
and dual or auto range mode. In the dual and auto range modes, both the
"High Range" or "Low Range" buttons averaging buttons will be available.
Home Screen>Settings>Measurement Settings (single range mode)
Home Screen>Settings>Measurement Settings (dual or auto range
mode)
The Measurement Setting menu contains the following information:
Averaging Time: Sets the averaging time for the CO sample
●
measurement and O
Range Mode Selection: User can choose between the various range
●
modes: single, dual, or auto. For more information, see
Selection" on page
Range Setting: Sets the concentration range for the analog outputs when
●
in single range mode.
sample measurement (if option is enabled).
2
3-76
"Range Mode
Thermo Scientific