Thermo Scientific 48iQ Instruction Manual page 225

Bench/Heater
Thermo Scientific
Optical
Use the following procedure to remove the optical bench or replace heater
assembly.
Removal
Equipment required:
Hex drive, 5/32
Phillips drive, #1
Icon Here Allow to cool before handling bottom of optical bench.
1. Unplug electrical connections, J5 heater, J1 preamp, bottom
connection J8 motor, and top connection J4 opt.
2. Using a 5/32 hex drive, unfasten four #10-32 socket cap head screws
and lockwashers.
Figure 7–44. Bench Removal pt 1
Servicing
DMC Optical Bench
▲
48iQ Instruction Manual 7-41